柴达木盆地三湖坳陷横波勘探中的低幅异常消除技术

近年来,在柴达木盆地三湖坳陷开展了横波地震勘探,但是由于该区低幅度构造发育,横波静校正引起的"低幅"异常与上述低幅度构造相互混杂,难以区分。为此,针对该区横波表层调查难以控制表层横波速度模型的变化、横波近偏移距初至污染严重、横波折射层发育导致高速界面难以确定等问题,首先采用曲线拟合技术预测污染区横波初至时间确保初至完整性,然后采用面波模型与多层折射分层联合约束反演横波表层速度,最后通过基于速度谱分析的层位匹配建模技术确定合理的横波速度界面,形成了横波表层"低幅"异常消除技术,并进行了现场应用及效果评价。研究结果表明:①曲线拟合技术可以弥补近道污染区横波初至空白,保证层析反演模型的完整性;②基于瑞雷波的频散特性反演建模可以为确定该区浅层横波速度提供可靠的资料,提高浅层模型精度;③面波模型与多层折射分层联合约束反演能够更准确的反演该区表层横波速度场,较好地建立横波速度模型,消除横波剖面上"低幅"异常现象。结论认为,所形成的横波地震勘探低幅异常消除技术消除了横波静校正引起的"低幅"异常现象,提高了横波地震资料的成像品质。     

Evaluation of dynamic modulus measurement for C/C-SiC composites at different temperatures

The determination of elastic properties at application temperature is fundamental for the design of fibre reinforced ceramic composite components. An attractive method to characterize the flexural modulus at room and high temperature under specific atmosphere is the nondestructive Resonant Frequency Damping Analysis (RFDA). The objective of this paper was to evaluate and validate the modulus measurement via RFDA for orthotropic C/C-SiC composites at the application temperature. At room temperature flexural moduli of C/C-SiC with 0/90° reinforcement were measured under quasi-static 4-point bending loads and compared with dynamic moduli measured via RFDA longitudinally to fibre direction. The dynamic modulus of C/C-SiC was then measured via RFDA up to 1250°C under flowing inert gas and showed an increase with temperature which fitted with literature values. The measured fundamental frequencies were finally compared to those resulting from numerical modal analyses. Dynamic and quasi-static flexural moduli are comparable and the numerical analyses proved that bending modes are correctly modeled by means of dynamic modulus measured via RFDA. The nondestructive RFDA as well as the numerical modeling approach are suitable for evaluation of C/C-SiC and may be transferred to other fibre reinforced ceramic composite materials.     

基于XML的信息物理融合系统组件建模与仿真

信息物理融合系统（CPS）涉及多种计算模型的集成和协同工作，针对CPS设计方法不统一、重塑性差、复杂度高、难以协同建模验证等问题，提出一种结构化、可描述行为的异元组件模型。首先，用统一组件建模方法进行建模，解决模型不开放问题；然后，用可扩展标记语言（XML）规范描述各类组件，解决不同计算模型描述语言不一致和不可扩展问题；最后，用多级开放组件模型的协同仿真验证方式进行仿真验证，解决验证的不可协同问题。通过通用组件建模方法、XML组件规范描述语言以及验证工具平台XModel对医用恒温箱进行了建模、描述和仿真。医用恒温箱的案例表明，这种模型驱动建立可重塑异元组件并确认其设计正确性的过程，支持信息物理协同设计和边构建边纠正，可避免在系统实现过程中发现问题时再进行反复修改。     

Dual pH‐ and thermal‐responsive nanocomposite hydrogels for controllable delivery of hydrophobic drug baicalein

Hydrogels have been widely used as mild biomaterials due to their bio‐affinity, high drug loading capability and controllable release profiles. However, hydrogel‐based carriers are greatly limited for the delivery of hydrophobic payloads due to the lack of hydrophobic binding sites. Herein, nano‐liposome micelles were embedded in semi‐interpenetrating poly[(N‐isopropylacrylamide)‐co‐chitosan] (PNIPAAm‐co‐CS) and poly[(N‐isopropylacrylamide)‐co‐(sodium alginate)] (PNIPAAm‐co‐SA) hydrogels which were responsive to both temperature and pH, thereby establishing tunable nanocomposite hydrogel delivery systems. Nano‐micelles formed via the self‐assembly of phospholipid could serve as the link between hydrophobic drug and hydrophilic hydrogel due to their special amphiphilic structure. The results of transmission and scanning electron microscopies and infrared spectroscopy showed that the porous hydrogels were successfully fabricated and the liposomes encapsulated with baicalein could be well contained in the network. In addition, the experimental results of response release in vitro revealed that the smart hydrogels showed different degree of sensitiveness under different pH and temperature stimuli. The results of the study demonstrate that combining PNIPAAm‐co‐SA and PNIPAAm‐co‐CS hydrogels with liposomes encapsulated with hydrophobic drugs is a feasible method for hydrophobic drug delivery and have potential application prospects in the medical field. © 2018 Society of Chemical Industry     

Indoor boundary layer chemistry modeling

Ozone (O₃) chemistry is thought to dominate the oxidation of indoor surfaces. We consider the hypothesis that reactions taking place within indoor boundary layers result in greater than anticipated hydroxyl radical (OH) deposition rates. We develop models that account for boundary layer mass‐transfer phenomena, O₃‐terpene chemistry and OH formation, removal, and deposition; we solve these analytically and by applying numerical methods. For an O₃‐limonene system, we find that OH flux to a surface with an O₃ reaction probability of 10^?8 is 4.3 × 10^?5 molec/(cm² s) which is about 10 times greater than predicted by a traditional boundary layer theory. At very low air exchange rates the OH surface flux can be as much as 10% of that for O₃. This effect becomes less pronounced for more O₃‐reactive surfaces. Turbulence intensity does not strongly influence the OH concentration gradient except for surfaces with an O₃ reaction probability >10^?4. Although the O₃ flux dominates OH flux under most conditions, OH flux can be responsible for as much as 10% of total oxidant uptake to otherwise low‐reactivity surfaces. Further, OH chemistry differs from that for ozone; therefore, its deposition is important in understanding the chemical evolution of some indoor surfaces and surface films.     

Physics‐based model of lithium‐ion batteries running on a circuit simulator

The authors developed a physics‐based equivalent circuit model of a lithium‐ion battery (LIB) whose parameters are continually updated, reflecting the theoretical calculation results of the Butler‐Volmer equation, diffusion equations of the lithium‐ion and lithium, and Nernst equations of the liquid and solid phases. The developed model was applied to the charge/discharge simulations of an LIB, and the experimental and simulated results of constant current discharges and pulsed‐charge/discharge were found to be in excellent agreement. In particular, using the developed model, analyzing transient responses of the LIB derived from the transition of the electric double layer charging to the electrode reaction is possible. These results demonstrate that the electrochemical performance of an LIB can be calculated on a circuit simulator using the developed model.     

区分站点状态的两级轮询控制系统

针对提高轮询控制模型工作效率和区分网络优先级的问题，提出了区分站点忙闲状态的完全-门限两级轮询控制模型（ETTPSS）。模型以两级优先级为基础，依据站点的忙闲状态采用并行处理方式只对忙站点进行信息分组发送服务。模型既能区分传输服务优先级又能避开对无信息分组的空闲站点的查询，从而提高了模型资源利用率和工作效率。运用概率母函数与马尔可夫链相结合的方法对该模型进行理论分析研究，精确解析了模型各个重要性能参数。仿真实验结果表明，仿真值与理论值近似相等，说明理论分析正确合理。与普通轮询模型相比，该模型性能大幅度提高。     

Electro-Thermal model of thermal breakdown in multilayered dielectric elastomers

Energy transduction of dielectric elastomers involves minute electrical and mechanical losses, both of which potentially increase the temperature within the elastomer. Thermal breakdown of dielectric elastomers occur when heat generated therein cannot be balanced by heat loss on the surface, which is more likely to occur in stacked dielectric elastomers. In this article an electro-thermal model of a multilayered dielectric elastomer able to predict the possible number of layers in a stack before thermal breakdown occurs is presented. Simulation results show that point of breakdown is greatly affected by an increase in surrounding temperature and applied electric field. Furthermore, if the stack diameter is large, thermal insulation of the cylindrical surface is a valid approximation. Two different expressions for the electrical conductivity are used, and it is concluded that the Frank-Kamenetskii expression is more conservative in prediction of point of breakdown than the Arrhenius expression, except at high surrounding temperature. © 2018 American Institute of Chemical Engineers AIChE J, 65: 859–864, 2019     

基于数据挖掘的开源电子资源访问行为统计模型

为了解决当前图书馆资源个性化推荐过程中存在推荐的准确率、召回率以及效率较低的问题,采用二维距离模型构建用户社区模型,用于描述访问用户与图书馆开源电子资源之间的关系,并对互联网用户需求和访问行为进行模糊规则推理.依据互联网用户属性和图书馆资源访问需求属性之间的模糊规则,建立图书馆开源电子资源访问行为统计模型,并利用该模型向用户提供个性化推荐服务.仿真结果表明,所建模型的推荐召回率高达98. 4%,推荐准确率为99. 2%,运行时间小于0. 04 s.所建模型能够为互联网用户提供准确、高效地图书馆资源个性化推荐服务.